|
||||||||
|
Complete Store DirectoryThanks for visiting our site. The following is a list of all our categories and products. Sails Our flagship camless freeride sail. Intuitively simple to rig and tune; dependable low-end power; rock solid stability; impeccable handling and control; premium function and performance; solid, lasting equipment value. The Retro is a proven and refined slalom sail for flat water and bump/jump windsurfing, with a bias to stability for power and speed. It delivers a wide, rideable wind range that gets you planning early, yet stays light and manageable in its top end. The Revolution is our board rider's sail - it features a smooth, limber power profile that is easily idled for aggressive board maneuvers and sail tricks. A silky smooth ride with a precise, forward pull and light neutral balance - power on loading and power off control, on demand. It's the perfect sail for pushing your repertoire of tricks, busting a down the line aerial or for just sweet high wind riding. The NX is our competitive speed-cult rig. A purebred cambered race sail developed for Formula, Slalom and Speed competition. It's about never being under powered and always being in control. It's precise, it's reliable, and it's really, really FAST. In 2009 NX sails swept the US National Championships and set the fast GPS speed times in America. State-of-the-art training sails for first time windsurfers and aspiring youth sailors. The Ripper is a scaled down rig with optimized low-load shaping and tension profiles suited for lightweight riders. Tested and proven in the largest windsurfing schools on the continent. Get your family windsurfing today! Power and acceleration are at the core of windsurfing's attraction. This is what got us hooked and it's what sustains our ride today. The Hucker sail exploits this end of windsurfing's appeal. The Hucker is wind surfing -- it's foil surfing the air flow, with a board at your feet. The design emphasis is on stability, power and control, at speed. It promotes an aggressive power-on sailing style that is focused on the leverage end of sail power. Hot deals on closeout sail models. Get 'em while they last! Used mast and sails USED SAILS These are our best rigs. Time tested and proven performance. Completely set up, just the way we ride them. Complete Ripper rigs, ready for action. 2010 NXrdm 5.4m² High speed slalom sizzle. Used by Bruce Peterson to win the 2009 US National Slalom Championship and by Derek Nielsen to set the North American GPS speed record (46.3 knots) LUFF: 425 cm BOOM: 177 cm 2010 NXrdm 6.2 m² High speed slalom sizzle. LUFF: 444 cm BOOM: 191 cm 2010 NX 7.1 m² Light wind slalom power. Used by Bruce Peterson to win the 2009 US National Slalom Championship. LUFF: 480 cm BOOM: 200 cm 2010 NX 8.2m² Light wind slalom power. LUFF: 509 cm BOOM: 211 cm NX4 8.5 m2 Developed for high wind Formula racing and as a class legal size for Junior racers. LUFF: 500 cm BOOM: 237 cm NX4 10.4 m2 This is a must-have sail for Formula sailing in stronger winds. LUFF: 556 cm BOOM: 265 cm
Backbone 340 cm 90% RDM Wave Mast Thick wall, small diameter masts in 90% carbon intended for wavesailing and radical high wind use and are 100% guaranteed against breakage.
Backbone 370 cm 90% RDM Wave Mast Thick wall, small diameter masts in 90% carbon intended for wavesailing and radical high wind use and are 100% guaranteed against breakage.
Backbone 400 cm 90% RDM Wave Mast Thick wall, small diameter masts in 90% carbon intended for wavesailing and radical high wind use and are 100% guaranteed against breakage.
Backbone 430 cm 90% RDM Wave Mast Thick wall, small diameter masts in 90% carbon intended for wavesailing and radical high wind use and are 100% guaranteed against breakage.
Backbone 460 cm 90% RDM Wave Mast Thick wall, small diameter masts in 90% carbon intended for wavesailing and radical high wind use and are 100% guaranteed against breakage.
Joystick 430 cm 75% Carbon Freeride Mast 75% carbon freeride mast - superior value with a balanced mix of durability and performance.
Joystick 460 cm 75% Carbon Freeride Mast 75% carbon freeride mast - superior value with a balanced mix of durability and performance.
Joystick 490 cm 75% Carbon Freeride Mast 75% carbon freeride mast - superior value with a balanced mix of durability and performance.
Joystick 520 cm 75% Carbon Freeride Mast 75% carbon freeride mast - superior value with a balanced mix of durability and performance.
Lipstick 370 cm 55% Carbon Wave Mast 55% carbon wave mast. Standard diameter base tapering to a small diameter, strong and for dependable for aggressive sailing. Rated and fully warrantied for surf sailing.
Lipstick 400 cm 55% Carbon Wave Mast 55% carbon wave mast ? conventional base tapering to a small diameter, for dependable responsive surf sailing.
Lipstick 430 cm 55% Carbon Wave Mast 55% carbon wave mast ? conventional base tapering to a small diameter, for dependable responsive surf sailing.
Lightstick 490cm 100% Carbon Race Mast Aerospace construction in 100% prepreg carbon fiber layup, cured in a high temperature autoclave.
Lightstick 520cm 100% Carbon Race Mast Aerospace construction in 100% prepreg carbon fiber layup, cured in a high temperature autoclave.
Lightstick 550cm 100% Carbon Race Mast Aerospace construction in 100% prepreg carbon fiber layup, cured in a high temperature autoclave. 100% glass kids & school mast - super soft, lightweight mast for small sails. 100% glass kids & school mast ? super soft, lightweight mast for small sails.
Speedstick 460 cm 100% Carbon Race Mast 100% carbon racing mast the ultimate in lightweight high reflex racing response.
Speedstick 490 cm 100% Carbon Race Mast 100% carbon racing mast the ultimate in lightweight high reflex racing response.
Speedstick 520 cm 100% Carbon Race Mast 100% carbon racing mast the ultimate in lightweight high reflex racing response. Boom for Ripper3 1.2 to 2.5 sq. meter sizes. Adjustable from 100 cm to 130 cm in length. Small (1") diameter tubing that easy for small hands to grip. Versatile front boom end that will clamp to standard and RDM mast diameters. Quick-clip boom adjustment make easy use of the 30 cm range of this boom. Boom for Ripper3 3.3 to 5.0 sq. meter sizes. Small (1") diameter tubing that easy for small hands to grip. Versatile front boom end that will clamp to standard and RDM mast diameters. Quick-clip boom adjustment make easy use of the 50 cm range of this boom. 2010 RIPPER 1.2 m² .......... LUFF: 232 cm | BOOM: 98 cm MSRP $287.00 2010 RIPPER 1.7 m² .......... LUFF: 263 cm | BOOM: 110 cm MSRP $300.00 2010 RIPPER 2.5 m² .......... LUFF: 293 cm | BOOM: 122 cm MSRP $315.00 2010 RIPPER 3.3 m² .......... LUFF: 327 cm | BOOM: 139 cm MSRP $330.00 2010 RIPPER 4.2 m² .......... LUFF: 364 cm | BOOM: 159 cm MSRP $346.00 2009 RIPPER-3 5.0 m² .......... LUFF: 393 cm | BOOM: 177 cm MSRP $359.00 2010 REVOLUTION 3.4 m² The Revo 3.4 has been fined tuned by our team of ripping riders who chase the big wind conditions. This is serious control for when its seriously windy, but with a smooth, wide power band. LUFF: 365 cm | BOOM: 137 cm REVOLUTION 3.8 m2 The Revo 3.8 .......... LUFF: 383 cm | BOOM: 143 cm REVOLUTION 4.0 m2 The Revo 4.0.......... LUFF: 394 cm | BOOM: 148 cm 2010 REVOLUTION 4.2 m² The Revo 4.2 has been fined tuned by our team of ripping riders who chase the big wind conditions. Good, smooth riding power to make it through the lulls, backed by trusty stability and control for the big gusts. Another perennial favorite for the high wind quiver. LUFF: 400 cm | BOOM: 152 cm REVOLUTION 4.6 m2 The Revo 4.6.......... LUFF: 413 cm | BOOM: 163 cm 2010 REVOLUTION 4.8 m² The Revo 4.8.......... LUFF: 421 cm | BOOM: 168 cm REVOLUTION 5.0 m2 The Revo 5.0 .......... LUFF: 429 cm | BOOM: 170 cm REVOLUTION 5.4 m2 The Revo 5.4 .......... LUFF: 445 cm | BOOM: 176 cm REVOLUTION 5.8 m2 The Revo 5.8 .......... LUFF: 453 cm | BOOM: 187 cm REVOLUTION 6.2 m2 The Revo 6.2.......... LUFF: 460 cm | BOOM: 193 cm 2010 RETRO 4.5 m² Looking for control and stability in a sail that has some wind range? The Retro 4.5 is a high wind speed cruiser with guts in the low, rock solid top end, and a smooth power-band in between. Boldly go with confidence into the big breezes. LUFF: 409 cm | BOOM: 154 cm 2010 RETRO 5.0 m² Versatile power, range, handling and control. Retro 5.0 conditions are some of the best windsurfing to be had. The 5.0 Retro rips it up with awesome acceleration, a rock solid power band, and a forgiving and stable top end groove. Feel like jumping? The 5.0 Retro has legendary rep in the air. Get out of the holes with ease and lock and load the top end. Sick wind range! LUFF: 426 cm | BOOM: 162 cm 2010 RETRO 6.0 m² Slalom power with slippery, controllable handling backed up by rich, responsive low end power. Tuned for top end the Retro 6.0 is a full speed sleeper. Heavyweight riders can rig this size on a 460 mast for more top end stability. LUFF: 458 cm | BOOM: 177 cm 2010 RETRO 6.5 m² This is the all time most popular Sailworks model - the #1 seller for the past 11 years. Smooth riding, powerful, always stable, simple to rig and built to last. Whether its your smallest sail in a light wind biased quiver, or your largest sail in a high wind biased quiver, the 6.5 Retro is a seasoned thoroughbred. LUFF: 473 cm | BOOM: 186 cm 2010 RETRO 7.0 m² Smooth riding, powerful, always stable, simple to rig and built to last. LUFF: 484 cm | BOOM: 195 cm 2010 RETRO 7.5 m² Smooth riding, powerful, always stable, simple to rig and built to last. The 7.5 Retro is a cross over size that can be rigged on a 460 or 490 mast. Heavier riders (greater than 200 lb/90 kg) should consider using the longer and stiffer 490 cm mast for more rig stability and top end (vice versa for lighter and mid-weight riders). LUFF: 490 cm | BOOM: 205 cm
Adjustable Outhaul - Formula Double Side Double side adjustable outhaul system. Simple to attached to the boom (no tools required) and easy to set up. Allows for powerful 4:1 purchase on either side without additional pulleys on the sail clew grommet. Heavy ribbed webbing gives textured feel for controlled micro adjustment. Spring loaded camlock buckle allows for precise controlled release. Each kit comes with two closed loops of Dyneema line containing the adjustment straps and purchase pulley, plus 300 cm of Dyneema line for the outhaul line. Learn more about the Adjustable Outhaul here Versatile. Adjustable. Effective. Serviceable. The Quiktune lines are based around a simple V-jam line cleat. They are supplied with Marlow line and high durometer, durable urethane tubing sleeves. The unique V-jam cleat resists fouling by sand, grit and salt for a secure hold and quick adjustment. Long arms? Short arms? Waist harness? Seat harness? No problem! Quiktune lines are supplied in a generous 24" to 30" configuration, but can easily shorten by trimming the tubing and shifting the stopper knots to what ever min. & max. length you desire. All line components are user serviceable for long-term reliable performance. Get the advantage of smooth, easy to adjust harness lines for improved rig control on all points of sail. Set the lines up with the cleat on the rear attachment point, with the V-jam away from you. The adjustment technique to shorten the lines is to pull down and push way while holding the line tension to lock the line. To release or lengthen the lines, simply pull down and hold the line towards you. Classic "4-knots" tube webbing bungee uphaul. Individually cut numbers and letters from stickyback polyester sailcloth, 10" (25cm) tall. Price is for each letter/number. To order, count the number of character in your sail number, and then multiplied by the quantity of number sets required. Enter this figure as your order quantity. In the comments section of the order form type out your sail number. Marlow's 6mm 8-Plait prestretched polyester line used for QuickTune adjustable harness lines. Sold by the centimeter. Sampson's Amsteel is a 3 mm single braid spectra line. Super low stretch and great wear. The racers choice for low stretch adjustable outhaul lines. Sold by the centimeter. Marlow's 4mm, 8-Plait prestretched polyester line. Its a great all purpose line for the downhaul and outhaul! Sold by the centimeter. Typical downhaul line length: 200 cm Typical fixed outhaul line length: 75 cm Replacement nylon sailbag. Florescent yellow with black vented mesh panel; zipper end opening and inside pocket with Velcro closure. No model or dimension markings, but screen printed SAILWORKS on one side. Ripper RDM base extension for reduced diameter masts and offers up to 26cm base extension. Comes with pre-stretched Marlow downhaul line (not shown).
Streamlined Strap-on Boom Head for RDM Mast RDM version of cast aluminum bolt together boom head with high density urethane bushings and straps. This is THE strongest, stiffest boom to mast connect for carbon fiber masts and booms. Easy to retrofit to most high end carbon booms. The standard Strap-On head comes set up for HPL or older Gulftech booms (37 mm OD carbon head piece). Other bushings are available for Fiberspar, Pryde and newer Gulftech booms, but must be ordered separately.
Streamlined 30cm RDM base w/ball bearing sheaves Streamlined RDM base extension with easy lacing "Quick-6" ballbearing pulleys. Fits inside reduced diameter masts and offers up to 30cm base extension
Streamlined 30cm Base Extension w/ball bearing sheaves Streamlined base extension with easy lacing "Quick-6" ballbearing pulleys. Fits inside standard diameter masts and offers up to 30cm base extension
Streamlined 46cm Base Extension w/ball bearing sheaves Streamlined base extension with easy lacing "Quick-6" ballbearing pulleys. Fits inside standard diameter masts and offers up to 46cm base extension Rigging 101 - High performance Sail Tuning DVD At 28 minutes in length, Rigging 101 reviews in detail the concepts of sail rigging and tuning with personal tip and insights from Sailworks designer Bruce Peterson. The focus of the video tuning seminar is a Retro 6.5 sail, but the underlying tuning concepts are applicable to all sails. View trailer here. FLY THE SAILWORKS FLAG! Screen printed on silky lightweight flag nylon. Constructed with closed top sleeve for mounting over a mast. Thermotech Fleece Jacket 100% Polyester Sailworks logo on left chest. Available Colors: Coffee/Black Blue Dusk/Black Cool Gray/Black Pre-positioned white vinyl sticker. Makes a great window sticker. Pre-positioned black vinyl decal. Pre-positioned black vinyl decal Pre-positioned black vinyl decal. Nice size for sails or equipment trailers. Pre-positioned black vinyl decal. Large size for when you really want to be seen. Screen printed stickyback Dacron tack label Mini version of the screen printed stickyback tack logo. Got keys? Keep 'em together with a Sailworks key ring. Machined Delrin hard mast plug for use with T-Top fitting on XT and XT2 sails. Small size 23.2 mm outside diamter for XR 460 and XR 490 masts. Machined Delrin hard mast plug for use with T-Top fitting on XT and XT2 sails. Small size 24.7 mm outside diamter for XR0-430 cm masts. Micro camber (large size) for use in Bravo, Syncro, SYncro Pro and Syncro Pro II sails. Micro camber (small size) for use in Bravo, Syncro, SYncro Pro and Syncro Pro II sails. Variable Tension (VT) adjustable camber inducer used on Sailworks models SX, XT, XT2, NX and NX2 (1998-2002). Standard size external headcap. Note: does NOT fit on Backbone RDM and other brand RDM masts. Use the larger size (34 mm) for those masts. Large size external headcap for use on Backbone RDM and other RDM brand masts. Hex key batten tensioning tool. Used on all Sailworks sails since 1998. Standard 5/32" size in stainless. High density rubber mast plug for mast tip - 28mm, smaller size. Has hole in top to accept stem type headcap fittings. High density rubber mast plug for mast tip - 30mm, larger size. Has hole in top to accept stem type headcap fittings.
Streamlined Batten Tensioner (SBT) Streamlined Batten Tensioner, complete with cap screw and nut.
Screw and Nut for Batten Tensioner Replacement stainless cap screw and nut for Streamlined Batten Tensioner (SBT). Rotating T-Top Fitting that interfaces between the mast tip and top batten. Used on XT and XT2 sails. For best performance, the T-Top Fitting is designed to operate in conjunction with the hard, white Delrin mast plugs. Roller and stainless pin for VTC and Fixed cambers. For use in SX, XT, XT2, NX, NX2, NX3 & NX4 cambered sails.
8.5 mm rod batten finished (per cm)
9.0 mm rod batten finished (per cm)
Tube/rod batten finished (per cm)
Carbon tube/rod batten finished (per cm) Plastic coupling ferrule to join a solid rod batten to hollow tube batten. Accepts 8.5 mm diameter rod batten and inserts into 10.5 mm inside diamter tube batten. This part should be glued into the tube batten. 8.5 mm rod batten and connecting ferrule. Used on the leech end of tube battens to ste down to the batten tensioner. RETRO 10.0 m2 LUFF: 538 cm | BOOM: 255 cm 2010 HUCKER 3.7 m² This is the little brother Hucker sail to accompany the 4.2 size for when the spray gets whipped up. LUFF: 368 cm | BOOM: 143 cm 2010 HUCKER 4.2 m² This is the sail that started the whole Hucker "power-sail" concept with Dale Cook. The 4.2 size is the legendary power behind Dale's trademark 40-foot jumps. If high wind sailing to you is all about going fast and busting big jumps, then you've come to the right place. LUFF: 402 cm | BOOM: 157 cm 2010 HUCKER 4.8 m² Designed for high octane power sailing for bigger, and more aggressive riders who like to go fast, turn hard and jump high. Proven to be just as well suited for more modestly inclined riders to cruise around on the smallest sail they can get away with. Either way, the Hucker sails "ride big" and the 4.8 Hucker covers the same wind range as the 5.0 Retro or 5.2 Revo would do. LUFF: 428 cm | BOOM: 171 cm Plastic rejuvenator for synthetic fabrics and materials. Protects surfaces from fading and UV exposure. UV Tech works well to clear up scratches in monofilm. It won't repair the scratches but it does reduce some of the opacity that the scratches cause. Don't let a torn sail panel end your session! Session Saver is a clear, high tack polyurethane tape with excellent bond and shear properties. Make strong last repairs at the beach and get back on the water fast. Comes in a handy 7.5 cm wide by 4.6 meter long roll. - GET 'EM WHILE THEY LAST! 2009 RETRO 4.5 m² Luff: 409 cm | Boom: 161 cm Includes FREE Rigging DVD GET 'EM WHILE THEY LAST! 2008 HUCKER 3.7 m² LUFF: 378 cm | BOOM: 144 cm Includes FREE Rigging DVD | Complete Ripper 2.5 rig - This is the Ripper rig to have if your just starting out teaching young kids (6-10 years) that weigh 50 to 90 pounds. Rig components: 2010 Ripper 2.5 m2 sail Ripstick RDM 310 cm mast Ripper mast base extension Ripper boom 100 - 150 cm Bungee uphaul | Complete Ripper 3.3 rig - The Ripper rig for older kid sailors, aged 9-12 or 60 to 100 pounds in weight. This is the age and weight group of kids that really fly up the learning curve. Just give 'em some quality water time and watch them go! Rig components: 2010 Ripper 3.3 m2 sail Ripstick RDM 310 cm mast Ripper RDM mast base Ripper boom 130 - 180 cm Bungee uphaul | Ripper 4.2 Complete Rig - This is the Ripper complete rig for advanced kid rippers, or teenage and adult first time windsurfers. Still leaving the family at home when you go windsurfing? Here's your chance to go windsurfing AND spend some quality time with your family. Sail & Mast: 2010 Ripper 4.2 m2 sail Ripstick RDM 370 cm mast Ripper RDM Mast Base Ripper boom 130-180 cm Bungee uphaul The original Sailworks camber inducer used on models Race, Syncro, Cam-1 and Quadro (1990 - 1995) Fixed camber inducer used on Sailworks models NX3 and NX4 (2003 & 2004). Plastic batten stop for fixed camber (NX3 & NX4). Comes with 4 aluminum press rivets. Plastic shims for Fixed Camber Inducer. Set of three stackable shims in 2 mm, 4 mm and 6 mm thicknesses. 2010 REVOLUTION 3.0 m² The Revo 3.0 has been fined tuned by our team of ripping ladies who shred Dougs and The Wall when its 40+ and spraying. This is serious control for when its seriously windy. LUFF: 349 cm | BOOM: 130 cm Keep your favorite after sailing beverage cool with this 3 mm neoprene can cooler! CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. The Goldwing is the safest most trim reliable fin for high wind slalom blasting. It takes some serious pilot error to spin one out, and flow recovery from trim errors is quick and precise. Comes with high density EVA fin cover. CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. The Goldwing is the safest most trim reliable fin for high wind slalom blasting. It takes some serious pilot error to spin one out, and flow recovery from trim errors is quick and precise. Comes with high density EVA fin cover. Are you tired of pulling on the downhaul line? Struggling to get enough downhaul tension? This crank-type downhaul winch makes setting the downhaul tension a cynch! It clicks into Chinook cup mast bases and allows for effortless yet, very precise control of the downhaul, even on the largest race sails.
Used 2006 Retro 5.5 sail (b/y) Used 2006 Retro 5.5 sail from a team rider. Blue/yellow color scheme. Luff: 446 cm Boom: 177 cm
Used 2009 Retro 5.5 sail (r/b) Lightly used 2009 Retro 5.5 sail from our demo fleet. Red black color scheme. Rating A. Luff: 446 cm Boom: 182 cm The complete HOT STUFF instant adhesive (cyanoacrylate) kit. This is serious instant glue. We use it to assemble battens and laminating small ding repairs, but it has 1000's of other uses. Hot Stuff is in the same league as duct tape - every toolbox needs some. See the Hot Stuff web page for more product information and tips on use. This kit includes a one-ounce bottle of the original Hot Stuff glue, a one-ounce bottle of gap-filling Super T, and a one-ounce bottle of ultra gap-filling Special T, so you have the right glue for every application. The kit also includes a six-ounce aerosol can of our NCF-Quick accelerator to shorten cure times and strengthen bonds, a two-ounce bottle of Super Solvent to get the glue off of your hands, and two extra spouts and overcaps. A very detailed product information booklet is included with a handy clear vinyl pouch. 100% cotton white t-shirt with black print. Front print the same on all styles: "Sailworks | The Gear That Works" Back print available with JUMP silhouette, JIBE silhouette, or COG logo. 100% cotton white t-shirt with black print. 100% cotton beige t-shirt with black print. 100% cotton green t-shirt with black print. Front print the same on all styles: "Sailworks | The Gear That Works" Back print available with JUMP silhouette, JIBE silhouette, or COG logo. Low profile ultra-touch Cotton Tech ball cap, water-repellent, with adjustable back strap. Sailworks Day Pack Large enough for your laptop, paper files, lunch, sweatshirt and water bottle. Features
Replacement Straps for Alloy Boom Heads Replacement webbing straps for the Streamlined and HPL Alloy boom heads. Set of two straps. 2010 NXfw 9.1 m² Developed for high wind Formula racing. LUFF: 517 cm BOOM: 240 cm 2010 NXfw 9.9 m² Developed for moderate to high wind Formula racing. LUFF: 542 cm BOOM: 254 cm NXfw 10.8 m² Developed for light to moderate wind Formula racing. LUFF: 562 cm BOOM: 262 cm
Deboichet R13 68 cm Soft +8 rake This is the classic Deboichet custom FW fin with a +8 rake angle in the soft stiffness. This very upright rake angle and soft flex gives maximum power and leverage for light winds. The R13 is the best all around race fin from Deboichet. It has good low end power, combined with an easy trim feeling. In stronger winds this fin always has positive control. It holds good angle upwind and is fast and slippery on the downwind reaches.
Deboichet R16 68 cm Medium +8 rake This is the latest Formula race fin from Deboichet. Its a leaner, slightly narrower foil so its slippery fast through the water. It is also very upright (+8 rake) so its very lifty and quick to power up. It has 6mm barrel nuts (can be tapped to standard 1/4"-20 threads) and an EVA foam cover. Bruce Peterson cleaned house in the 2006 and 2007 Gorge Cup Series with this fin. REVOLUTION 6.9 m2 The Revo 6.9 .......... LUFF: 477 cm | BOOM: 203 cm 2010 HUCKER 5.6 m² Our #2 best selling sail that has THE most passionate group of riders. Designed for high octane power sailing for bigger, and more aggressive riders who like to go fast, turn hard and jump high. Proven to be just as well suited for more modestly inclined riders to cruise around on the smallest sail they can get away with. Either way, the Hucker sails "ride big" and the 5.6 Hucker covers the same wind range as the 6.0 Retro does. LUFF: 451 cm | BOOM: 184 cm REVOLUTION 5.6m2 The Revo 5.6 .......... LUFF: 449 cm | BOOM: 181 cm
Used 2006 Hucker 3.7 sail (r/b) Lightly used 2006 Hucker 3.7 sail. Luff: 379 cm Boom: 141 cm GET 'EM WHILE THEY LAST! 2008 REVOLUTION 5.2 m² The Revo 5.2 .......... LUFF: 435 cm | BOOM: 174 cm Includes FREE Rigging DVD 2010 HUCKER 6.6 m² Designed for high octane power sailing for bigger, and more aggressive riders who like to go fast, turn hard and jump high. Proven to be just as well suited for more modestly inclined riders to cruise around on the smallest sail they can get away with. Either way, the Hucker sails "ride big" and the 6.6 Hucker covers the same wind range as the 7.0 Retro does. LUFF: 467 cm | BOOM: 207 cm GET 'EM WHILE THEY LAST! 2008 HUCKER 4.8 m² LUFF: 428 cm | BOOM: 171 cm Includes FREE Rigging DVD GET 'EM WHILE THEY LAST! 2009 RETRO 5.5 m² Luff: 446 cm | Boom: 182 cm Includes FREE Rigging DVD
Used 2004 Retro 5.5 sail (r/y) Used 2004 Retro 5.5 m2 sail from a local team rider. Luff: 444 cm Boom: 175 cm
Deboichet Custom SL2 32 cm fin Deboichet Custom fin, SL2 slalom model in the 32 cm size. The SL2 is a classic upright trapezoid outline but with a thinner narrower tip than the SL1 model. It has 14"-20 (American) threaded barrel nuts and comes with EVA foam cover.
Lightstick 460cm 100% Carbon Race Mast Aerospace construction in 100% prepreg carbon fiber layup, cured in a high temperature autoclave. Currently sold out until March 2007
Lipstick 460 cm 55% Carbon Wave Mast 55% carbon wave mast ? conventional base tapering to a small diameter, for dependable responsive surf sailing. Get 'em while they last 2006 Hucker 3.7 m2 LUFF: 380 cm BOOM: 145 cm - GET 'EM WHILE THEY LAST! 2009 RETRO 5.0 m² LUFF: 426 cm | BOOM: 171 cm Includes FREE Rigging DVD CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount. Comes with high density EVA fin cover. CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount. Comes with high density EVA fin cover. CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount. Comes with high density EVA fin cover. CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount. Sicko fast for speed sailing too! Comes with high density EVA fin cover. Ripper stubby mast base (no extension adjustment) that fits inside standard masts or around the outside reduced diameter masts. Comes with pre-stretched Marlow downhaul line (not shown). Formuline is the BEST downhaul line, bar none! Manufactured by Marlow from high tensile Dyneema fibers in a tightly woven 12-plait single braid, 3.8mm in diameter. Formuline runs smoothly around pulleys and wears exceptionally well in cleats. Sold by the centimeter.
Pre-Cut Formuline Downhaul Line Formuline is the BEST downhaul line, bar none! Manufactured by Marlow from high tensile Dyneema fibers in a tightly woven 12-plait single braid, 3.8mm diameter. Formuline runs smoothly around pulleys and wears exceptionally well in cleats. Pre-cut 200 cm length for the downhaul line. Used 2007 NX 9.9 m2 sail from a local racer. Luff: 542 cm Boom: 254 cm Moderately used NX 9.9 Formula sail. Has some scratches and a headcap repair, but lots of life left in it. Luff: 545 cm Boom: 262 cm
Used 2009 Hucker 4.2 sail (r/y) Lightly used 2009 Hucker 4.2 from our demo program. Luff: 402 cm Boom: 157 cm Lightly used 2009 NX 6.2 sail from our demo program. Luff: 444 cm Boom: 191 cm
Used 2007 Hucker 3.7 sail (b/y) Used 2007 Hucker 3.7 from a shop rider. Condition B+. Luff: 380 cm Boom: 144 cm
Used 2008 Revolution 5.4 sail (r/r) 2008 Revo 5.4 sail from our photo shoot quiver. Rating B. Luff: 443 cm Boom: 177 cm | Complete Ripper 1.7 rig - This is the Ripper rig to have if your just starting out teaching young kids (5-8 years) that weigh 40 to 60 pounds. Rig components: 2010 Ripper 1.7 m2 sail Ripstick RDM 310 cm mast Ripper stubby mast base Ripper boom 100-150cm Bungee uphaul | Ripper 1.2 Complete Rig - This is the Ripper rig to have if your just starting out teaching young kids (5-8 years) that weigh 40 to 60 pounds. Rig Components: 2009 Ripper 1.2 m2 sail Ripstick RDM 310 cm mast Ripper RDM mast base Ripper boom 100 - 150 cm Bungee uphaul 2010 RETRO 5.5 m² This is hallowed ground in the Sailworks stable. No matter whether you're 220 and the 5.5 is your smallest sail or you're 130 pounds and its your biggest, the 5.5 Retro delivers the goods. Juicy smooth low end power or a wicked turn of speed, pegged on the limit, the 5.5 Retro is a must have size. LUFF: 446 cm | BOOM: 171 cm 2010 RETRO 8.0 m² Smooth riding, powerful, always stable, simple to rig and built to last. The 8.0 size is where the "John Deere" influence starts to creep into the Retro line-up. Copious low-end power couple with good rig stability to get you planing early and keep you in control longer. LUFF: 504 cm | BOOM: 214 cm 2010 RETRO 8.5 m² Smooth riding, powerful, always stable, simple to rig and built to last. Copious low-end power couple with good rig stability to get you planing early and keep you in control longer. LUFF: 512 cm | BOOM: 223 cm 2010 RETRO 9.0 m² Smooth riding, powerful, always stable, simple to rig and built to last. This is serious "lull busting" get your butt planing low end power. Cut fuller than most camber sails, the 9.0 Retro delivers exceptional low end power while retaining solid draft stability. LUFF: 517 cm | BOOM: 232 cm 2010 RETRO 9.5 m² Smooth riding, powerful, always stable, simple to rig and built to last. This is serious "lull busting" get your butt planing low end power. Cut fuller than most camber sails, the 9.5 Retro delivers exceptional low end power while retaining solid draft stability. LUFF: 527 cm | BOOM: 242 cm 2010 RETRO 10.0 m² Smooth riding, powerful, always stable, simple to rig and built to last. This is serious "lull busting" get your butt planing low end power. Cut fuller than most camber sails, the 10.0 Retro delivers exceptional low end power while retaining solid draft stability. LUFF: 538 cm | BOOM: 248 cm REVOLUTION 3.8 m2 The Revo 3.8 .......... LUFF: 383 cm | BOOM: 143 cm 2010 REVOLUTION 4.6 m² The Revo 4.6.......... LUFF: 412 cm | BOOM: 164 cm 2010 REVOLUTION 5.0 m² The Revo 5.0 .......... LUFF: 428 cm | BOOM: 171 cm 2010 REVOLUTION 5.2 m² The Revo 5.2 .......... LUFF: 435 cm | BOOM: 174 cm 2010 REVOLUTION 5.4 m² The Revo 5.4 .......... LUFF: 443 cm | BOOM: 177 cm 2010 REVOLUTION 5.8 m² The Revo 5.8 .......... LUFF: 453 cm | BOOM: 186 cm 2010 REVOLUTION 6.2 m² The Revo 6.2.......... LUFF: 462 cm | BOOM: 193 cm Cherry clean '09 I-Sonic 101 slalom board. No dings or repairs and perfect bottom shape. Ridden less than 5 times. Comes as shown, with the straps, but no fin. Length: 234 cm Width: 63.5 cm Volume: 101 liters Weight: 6.2 kg Suitable for sails from 5.0 to 7.5 sq. meters. Effortless gliding in zephyr breezes on this slightly used 2007 Serenity Wood light wind board. The board is in excellent condition, with 2 minor dings, both expertly repaired. Comes with a 40 & 64 cm center fins. "The design brief was simple: develop a concept board that would make sailing in 2-9 knots exciting, challenging and rewarding. The instant acceleration, totally serene gliding sensation, almost ghosting and alive ride makes light wind areas around the world become the playground for people who take pleasure in the smooth sensitivity of a windsurfing hull." Length: 455cm Width: 61cm Volume: 255 liters Weight: 12kg Suitable for sails from 6.5 to 11.0 sq. metres.
Starboard Formula Experience 160 Interested in riding a Formula board? This is the perfect entry into high performnce light-wind windsurfing: Immaculate Starboard FE 160 - this board has been ridden only once and is perfect condition! Comes with a Deboichet/Drake 70 cm fin and DaKine padded travel bag. Volume: 160 liters Length: 228 cm Width: 100 cm Weight: 11 kg Suitable for sails from 6.0 to 11.0 sq. meters. Unique men's billfold wallet made from PX-15 x-ply scrim laminate and tanned leather. Available with chestnut brown leather (shown) or all black leather. REVOLUTION 4.0 m2 The Revo 4.0.......... LUFF: 394 cm | BOOM: 148 cm REVOLUTION 3.8 m2 The Revo 3.8.......... LUFF: 383 cm | BOOM: 143 cm REVOLUTION 3.8 m² The Revo 3.8.......... LUFF: 380 cm | BOOM: 144 cm 2010 REVOLUTION 4.0 m² The Revo 4.0 has been fined tuned by our team of ripping riders who chase the big wind conditions. Good, smooth riding power to make it through the lulls, backed by trusty stability and control for the big gusts. LUFF: 391 cm | BOOM: 148 cm REVOLUTION 3.8 m² The Revo 3.8.......... LUFF: 380 cm | BOOM: 144 cm REVOLUTION 3.8 m² The Revo 3.8.......... LUFF: 380 cm | BOOM: 144 cm REVOLUTION 3.8 m² The Revo 3.8.......... LUFF: 380 cm | BOOM: 144 cm REVOLUTION 3.8 m² The Revo 3.8.......... LUFF: 380 cm | BOOM: 144 cm 2010 REVOLUTION 3.8 m² The Revo 3.8 has been fined tuned by our team of ripping riders who chase the big wind conditions. Good, smooth riding power to make it through the lulls, backed by trusty stability and control for the big gusts. This is mainstay high wind sail that is a perennial favorite. LUFF: 380 cm | BOOM: 144 cm
Used 2006 Retro 10.0 sail (b/y) 2006 Retro 10.0 from a Gorge team rider. Like new. Luff: 538 cm Boom: 255 cm
Used 2008 Revolution 5.4 sail (r/g) 2008 Revo 5.4 proto sail from our loft. Rating A. Luff: 443 cm Boom: 177 cm
Used 2007 Revolution 5.4 sail (r/y) Moderately used '07 Revolution 5.4 sail from our demo fleet. red/yellow color scheme. Luff: 445 cm Boom: 176 cm
Used 2006 Revolution 5.0 sail (r/y) Used 2006 Revo 5.0 from a team rider. Rating C. Luff: 429 cm Boom: 170 cm
Used 2008 Revolution 5.4 sail (r/y) Moderately used 2008 Revo 5.4 from a team rider. Luff: 443 cm Boom: 177 cm Deboichet UW speed model in the 24 cm size. The UW is Deboichet's all-out speed fin with a narrow elliptical outline and a thin high speed foil. It has 6mm threaded barrel nuts (can be tapped to 1/4"-20) and comes with EVA foam cover. GET 'EM WHILE THEY LAST! 2008 NX 6.6 m² High speed slalom sizzle. LUFF: 465 cm BOOM: 200 cm Includes FREE Rigging DVD GET 'EM WHILE THEY LAST! 2008 NX 7.2 m² Light wind slalom power. LUFF: 474 cm BOOM: 211 cm Includes FREE Rigging DVD
Sailworks Fleece 1/4 Zip Shirt Grizzly Micro-Fleece 1/4 Zip Shirt 100% Polyester Sailworks logo on left chest. Sizes and Colors are limited. Available Colors: Driftwood (Brown) Carbon (Blue) Titanium (Gray) Black
Sailworks Women's Fleece 1/4 Zip Shirt Women's Grizzly Micro-Fleece 1/4 Zip Shirt 100% Polyester Sailworks logo on left chest. Sizes and colors are limited. Available Colors: Mint Blue Ice Berrywine
Sailworks Women's Fleece Jacket Women's Grizzly Fleece Full Zip Jacket 100% Polyester Sailworks logo on left chest Sizes and colors are limited Available Colors: Black Mulberry
Sailworks Women's Stormbloc Jacket Women's Stormbloc Knitted Soft Shell Jacket 100% Polyester Sailworks logo on left chest Sizes and Colors are limited Available Colors: Black/Moonstone Bougainvillea/Moonstone (Pink) Stratosphere/Moonstone (Blue) Stormbloc Knitted Soft Shell Jacket 100% Polyester Sailworks logo on left chest Sizes and Colors are limited Available Colors: Steam/Black (Gray) Night Shadow/Shade (Blue) Hawaiian Pro-Line's extruded and milled aluminum alloy boom head. The strongest and stiffest boom to mast connect for carbon fiber masts and booms. Easy to retrofit to HPL carbon booms. Comes with urethane bushings to fit 36.5mm and 39.0mm carbon head tubes. Moderately used NX 9.9 Formula sail. Luff: 545 cm Boom: 262 cm
Used 2008 Hucker 4.8 sail (b/y) Lightly used '08 Hucker 4.8 sail from our demo program. Luff: 428 cm Boom: 171 cm Used 2007 NX 8.5 Formula sail from a local racer. Luff: 499 cm Boom: 240 cm
Deboichet R16 68 cm Soft +8 rake This is the latest Formula race fin from Deboichet. Its a leaner, slightly narrower foil so its slippery fast through the water. It is also very upright (+8 rake) and soft, so its very lifty and quick to power up. It has 6mm barrel nuts (can be tapped to standard 1/4"-20 threads) and an EVA foam cover. Bruce Peterson cleaned house in the '08 Gorge Cup Series with this fin.
Used 2009 Hucker 3.7 sail (r/b) 2009 Hucker 3.7 from our demo program. Mint Condition! Luff: 378 cm Boom: 144 cm
Used 2007 Hucker 3.7 sail (r/y) Lightly used '07 Hucker 3.7 sail from a loft rider. Luff: 379 cm Boom: 141 cm
Used 2009 Revolution 5.4 sail (r/y) 2009 Revo 5.4 from Windfest demo. B Condition! Luff: 443 cm Boom: 177 cm 2010 REVOLUTION 2.6 m² The Revo 2.6 has been fined tuned by our team of ripping ladies who shred Dougs and The Wall when its 40+ and spraying. This is serious control for when its seriously windy. LUFF: 335 cm | BOOM: 124 cm
| ||||||||
|
||||||||