The Gear

Carbon Twill 430 cm 95% carbon RDM mast IMCS: 26.2 Curve: 63.6 / 76.3 Weight: 1.8 kg Comes with padded foil mast bag. Learn More

FAST 460 cm 95% carbon RDM mast IMCS: 27.0 Curve: 64/77 Weight: 2.0 kg Comes with padded foil mast bag. Learn More

Skinny 340 cm 90% carbon RDM mast Learn More

Skinny 370 cm 90% carbon RDM mast Learn More

Skinny 400 cm 90% carbon RDM mast Learn More

Original Skinny 430 cm 91% carbon RDM mast IMCS: 22.0 Curve: 64.5/77.0 Weight: 2.1 kg Comes with padded foil mast bag. Learn More

Sumo 370 cm 91% carbon RDM mast IMCS: 16.0 Curve: 64.5 / 77.0 Weight: 1.5 kg Comes with padded foil mast bag. Learn More

Sumo 400 cm 91% carbon RDM mast IMCS: 19.5 Curve: 64.0 / 76.5 Weight: 1.7 kg Comes with padded foil mast bag. Learn More

Sumo 430 cm 91% carbon RDM mast IMCS: 23.0 Curve: 64.0/76.0 Weight: 1.9 kg Comes with padded foil mast bag. Learn More

Sumo 460 cm 91% carbon RDM mast IMCS: 26.5 Curve: 64.0/76.5 Weight: 2.1 kg Comes with padded foil mast bag. Learn More

Original Camber Inducer Learn More

Padded case for a single two-piece mast, with Velcro end flap and carry handle. Will fit RDM masts with the top and bottom sections side by side, but SDM masts must have the top section inserted inside the base section. Lengths are designed for masts where the top and bottom sections are equal overall length (including the coupling ferrule). If your top and bottom mast sections are NOT equal overall length, you should order the next longer mast bag. Learn More

Pin + Roller for Camber Learn More

Marlow's 6mm 8-Plait pre-stretched polyester line used for QuickTune adjustable harness lines. Replacement lines for QuickTune harness lines use 130 cm of 6mm line for each side. Sold by the meter. Learn More

Clear poly-urethane tubing for Quicktune Harness Lines. Fits 6 mm line. Sold by the meter. Learn More

Quiktune Harness Lines Learn More

Nolimitz RDM Boom Shim. Steps up mast the diameter from 38 mm (RDM) to 50 mm (SDM) so that RDM masts can be used with SDM boom heads. Fits boom heads up to 110 mm wide (jaw height). Learn More

RDM Camber Inducer Learn More

Filament wound vinylester/S-glass tube batten, 13.0mm OD, 10.5mm ID, with rod end and ferrule and aluminum ring. Priced by the meter, but available in any length up to 215 cm. Can be cut and prepared to your exact required length for easy tube replacement. This method of tube batten replacement assumes that you are able to salvage and re-use the tapered rod tip batten and plastic coupling ferrule. Detailed batten replacement Instructions here Learn More