Sailworks - The Fastest Name In Windsurfing | Fins
We stock carbon molded DEBOICHET CUSTOM racing fins from master craftsman, Jean-Jacques Deboichet and TECTONICS GOLDWING CNC milled G-10 fins from Dennis Parton.
Deboichet - These same fins used by championship Formula racers around the world. These fins are expensive and hard to get and we can't promise to always have them in stock. If there are fins listed below, we have them here. We can also special order any of Deboichet Custom models, sizes, stiffness' or rake angles that you want. Special orders take 6-8 weeks for delivery and must be prepaid. Contact Sailworks for more details
Tectonics - Renowned by top pro racers the world over as the fastest and most reliable fins for slalom. They're powerful, slippery and trustworthy at speed. We stock the Talon, Goldwing, Falcon and Tomahawk models in 2cm increments of popular size. Other models and sizes available by special order. Here's a brief description of each Tectonics model's purpose:
* Falcon: speed sailing and serious high wind control
* Goldwing: high lift reaching speed
* Talon: all-round slalom racing - FAST!
* Tomahawk: maneuverable freeride performance that ain't slow
WE HAVE GOOD PRE-OWNED FINS TOO!
|
| Deboichet Custom SL2 32 cm fin NEW!
Product #: DCSL2_32
SIZE: 36 cm
Deboichet Custom fin, SL2 slalom model in the 32 cm size. The SL2 is a classic upright trapezoid outline but with a thinner narrower tip than the SL1 model.
It has 14"-20 (American) threaded barrel nuts and comes with EVA foam cover.
[View Details] |
Our
Price: US $240.00
| |
| Deboichet UW 24 cm fin NEW!
Product #: DCUW_24
SIZE: 24 cm
Deboichet UW speed model in the 24 cm size. The UW is Deboichet's all-out speed fin with a narrow elliptical outline and a thin high speed foil.
It has 6mm threaded barrel nuts (can be tapped to 1/4"-20) and comes with EVA foam cover.
[View Details] |
Our
Price: US $240.00
| |
| Stainless 1/4-20 Fin Screws NEW!
Product #: FINSCREW
Stainless 1/4-20 Fin Screws
[View Details] |
Our
Price: US $2.00
| |
| Tectonics Falcon 26 cm NEW!
Product #: TFL26
SIZE: 26 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount. Sicko fast for speed sailing too!
The Falcon 26 is Dale Cook's fin of choice for boosting monster air!
[View Details]
Temporarily out of stock | |
|
| Tectonics Falcon 28 cm NEW!
Product #: TFL28
SIZE: 28 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes.
The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount.
Comes with high density EVA fin cover.
[View Details] |
Our
Price: US $195.00
| |
|
| Tectonics Falcon 30 cm NEW!
Product #: TFL30
SIZE: 30 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes.
The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount.
Comes with high density EVA fin cover.
[View Details]
Temporarily out of stock | |
|
| Tectonics Falcon 32 cm NEW!
Product #: TFL32
SIZE: 32 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes.
The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount.
Comes with high density EVA fin cover.
[View Details] |
Our
Price: US $195.00
| |
|
| Tectonics Falcon 34 cm NEW!
Product #: TFL34
SIZE: 34 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes.
The Falcon is our high wind fin of choice when there's spray in the air and board control is paramount.
Comes with high density EVA fin cover.
[View Details] |
Our
Price: US $195.00
| |
| Tectonics Talon 32 cm NEW!
Product #: TTL32
SIZE: 32 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the power of the Goldwing with the control of Falcon.
[View Details] |
Our
Price: US $195.00
| |
|
| Tectonics Talon 34 cm NEW!
Product #: TTL34
SIZE: 34 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the power of the Goldwing with the control of Falcon.
[View Details] |
Our
Price: US $195.00
| |
|
| Tectonics Talon 36 cm NEW!
Product #: TTL36
SIZE: 36 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the power of the Goldwing with the control of Falcon.
[View Details] |
Our
Price: US $205.00
| |
|
| Tectonics Talon 38 cm NEW!
Product #: TTL38
SIZE: 38 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $205.00
| |
| Tectonics Talon 40 cm NEW!
Product #: TTL40
SIZE: 40 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $205.00
| |
|
| Tectonics Talon 42 cm NEW!
Product #: TTL42
SIZE: 42 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $215.00
| |
|
| Tectonics Talon 44 cm NEW!
Product #: TTL44
SIZE: 44 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $215.00
| |
|
| Tectonics Talon 46 cm NEW!
Product #: TTL46
SIZE: 46 cm
CNC milled G-10 construction. Deep Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $225.00
| |
|
| Tectonics Talon 48 cm NEW!
Product #: TTL48
SIZE: 48 cm
CNC milled G-10 construction. Deep Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $235.00
| |
|
| Tectonics Talon 50 cm NEW!
Product #: TTL50
SIZE: 50 cm
CNC milled G-10 construction. Deep Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $235.00
| |
|
| Tectonics Talon 52 cm NEW!
Product #: TTL52
SIZE: 52 cm
CNC milled G-10 construction. Deep Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Talon is Tectonics latest model slalom racing fin blending the low-end power of the older Tomcat with the control of Goldwing.
[View Details] |
Our
Price: US $235.00
| |
| Tectonics Tomahawk 30 cm NEW!
Product #: TTM30
SIZE: 30 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Tomahawk is maneuverable freeride fin that that's forgiving to ride, yet still slippery, efficient and deceptively fast.
[View Details] |
Our
Price: US $195.00
| |
|
| Tectonics Tomahawk 34 cm NEW!
Product #: TTM34
SIZE: 34 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Tomahawk is maneuverable freeride fin that that's forgiving to ride, yet still slippery, efficient and deceptively fast.
[View Details] |
Our
Price: US $195.00
| |
|
| Tectonics Tomahawk 36 cm NEW!
Product #: TTM36
SIZE: 36 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Tomahawk is maneuverable freeride fin that that's forgiving to ride, yet still slippery, efficient and deceptively fast.
[View Details] |
Our
Price: US $205.00
| |
|
| Tectonics Tomahawk 38 cm NEW!
Product #: TTM38
SIZE: 38 cm
CNC milled G-10 construction. Low profile Tuttle base with tapped 1/4"-20 (standard) threaded holes. Comes with high density EVA fin cover.
The Tomahawk is maneuverable freeride fin that that's forgiving to ride, yet still slippery, efficient and deceptively fast.
[View Details] |
Our
Price: US $205.00
| |
|
